ETIC 1230 Bedienungsanleitung PDF herunterladen (Seite 27)

CONFIGURATION

Industrial router IPL-E User guide ref. 9015909-03 Page 27

2.4 Modifying the configuration from the WAN interface

Coming from factory, the firewall rejects all the packets coming from the

WAN to the LAN.

It is why, it is possible to reach the administration web server from the

WAN interface, only if a firewall rule has been created

to authorize IP

packets exchanges from a WAN IP address to the LAN IP address of the

router.

To reach the administration server from the WAN interface, it is also

possible to set a remote user PPTP or TLS connection.

Any remote user registered in the User list can reach all the devices of the

LAN interface including the router itself unless a User firewall rule has

been created to prevent him from reaching the LAN IP address of the

router.

3 Rebooting the router after parameters changes

• After the parameters any page have been completed, click the

« Save » button at the bottom of the page.

• After some parameters changes, the IPL-E must restart.

When the configuration has been completely carried out, click the

« Reboot » red button in the green bar, when displayed.

• Once the product has restarted, check the « Reboot » button has

disappeared from the green bar.

To save the configuration file to a hard disk :

•

••

•

Select the “maintenance” menu and then the “Save / restore” menu.

•

••

•

Click the “Save current configuration to disk” button.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 105 106

Keine Kommentare

ETIC 1230 Bedienungsanleitung Seite 27