ETIC 1230 Bedienungsanleitung PDF herunterladen (Seite 89)

CONFIGURATION

Industrial router IPL-E User guide ref. 9015909-03 Page 89

19.3.2 Configuration

•

••

•

Select the “gateway” menu and then the “Transparent” menu and then

click “RAW UDP”.

•

••

•

Select the “Activate” option.

« Serial input buffer size” parameter (value 1 to 1024)

Sets the maximum size of an UDP frame.

“End of frame time-out” parameter (value 10 ms to 5 sec ) :

Sets the delay the gateway will wait before sending the UDP frame

towards the IP network when no characters are received from the serial

interface.

«UDP port number» parameter :

Sets the UDP port number.

If the Raw UDP gateway is assigned to both serial COM ports, the UDP

port numbers must be different on each port.

“IP addresses of the destination devices » table :

This table stores the IP addresses of the gateways to which the serial data,

encapsulated inside UDP, have to be sent.

A different UDP port number can be entered for each destination IP address.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 105 106

Keine Kommentare

ETIC 1230 Bedienungsanleitung Seite 89