ETIC 1230 Bedienungsanleitung PDF herunterladen (Seite 86)

CONFIGURATION

Page 86 User guide ref. 9015909-03 Industrial router IPL-E

“TCP port number” parameter

Set the TCP port number the gateway has to use.

“IP address” parameter

The modbus client gateway allows to transmit modbus requests from the

serial modbus master device to any modbus slave device, more precisely

called “ modbus server”, located on the IP network.

To assign an IP address to each modbus slave device with which the

serial master device needs to communicate, click the “add a link” button;

Assign an IP address in front of each modbus slave address with which

the serial master device will have to communicate.

19.2 RAW TCP gateway

19.2.1 Raw client gateway

The RAW client gateway can be used if a serial “master” device has to

send requests to one slave device (also called server) located on the IP

network.

The server can be either an ETIC gateway or a PC including a software

TCP server.

• Select the “transparent” and then the “raw client COM1” or the “raw

client COM2” menu .

• Enable the raw client gateway; and set up the parameters as follows :

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 105 106

Keine Kommentare

ETIC 1230 Bedienungsanleitung Seite 86