ETIC 1230 Bedienungsanleitung PDF herunterladen (Seite 84)

CONFIGURATION

Page 84 User guide ref. 9015909-03 Industrial router IPL-E

“Local retry” parameter :

Set up the number of times the gateway will repeat a request before

declaring a failure.

“Inter-character gap” parameter :

Set up the maximum delay the gateway will have to wait between a

received character of a modbus answer frame and the following character

of the same frame.

“Modbus slave address” parameter:

Choose “specified by the modbus TCP client” , if the address of the slave

PLC must be decoded by the gateway from the modbus TCP frame

coming from the client.

Otherwise, specify the modbus address of the slave PLC; in that case only

one slave can be connected to the RS232 serial interface.

“TCP inactivity Timeout” parameter :

Set the time the gateway will wait before disconnecting the TCP link if no

characters are detected.

“TCP port number” parameter :

Set the port number the gateway has to use.

If the Raw TCP client gateway is assigned to both serial COM ports, the

TCP port numbers must be different on each port.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 105 106

Keine Kommentare

ETIC 1230 Bedienungsanleitung Seite 84