ETIC 1230 Bedienungsanleitung PDF herunterladen (Seite 17)

INSTALLATION

6 RS232 (XSLAN—1220, 1230, 2220 and -2230)

The RS232 data rate can be tuned from 1200 to 115200 b/s with parity

(even / odd) or no parity.

The data terminal must be less than 10 meters far from the modem.

Cables can be provided to connect the product to DTE and DCE as

follows :

RS232 cables (L=1m)

Code User connector Cable function

CAB592 SubD 9 male To connect a DCE to the XSLAN

CAB593 SubD 9 female To connect a DTE to the XSLAN

CAB609 wires To connect a device providing a specific

connector

7 RS485 (XSLAN-1230 or -2230)

The RS485 serial interface is

provided on the front panel 2 pins

screw-block.

Polarisation resistors

1 Kohm bus polarisation resistors

are included inside the product.

1K 1K

SW1

B(+) A(-)RS485

RS485 line adaptation

For a several meters long connection over the RS485 local interface, it is

not necessary to adapt the RS485 line. For a longer distance, connect a

120 Ohm resistor at each end of the line.

XSLAN SHDSL switch User’s guide ref 9014709-02

Page 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Keine Kommentare

ETIC 1230 Bedienungsanleitung Seite 17