ETIC 1230 Bedienungsanleitung PDF herunterladen (Seite 47)

HTML SET UP & DIAGNOSTIC

XSLAN SHDSL switch User’s guide ref 9014709-02 Page 47

received character of a modbus answer frame on the serial interface and

the following character of the same frame.

“Modbus slave address* parameter :

If only one modbus slave device is connected to the serial interface,

set the modbus address of the device; any TCP modbus request

received by the gateway will be sent on the serial interface using that

modbus address.

If several modbus slave devices are connected to the serial

interface, select “specified by modbus TCP client”;

In that case, each request sent by the TCP/IP modbus client to one of

the slaves connected to the serial interface must specify the modbus

slave address value in the modbus address field.

“TCP inactivity Timeout” parameter :

Set the time the gateway will wait before disconnecting the TCP link if no

characters are received.

“TCP port number” parameter :

Set the port number the gateway has to use.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 63 64

Keine Kommentare

ETIC 1230 Bedienungsanleitung Seite 47