ETIC 1230 Bedienungsanleitung PDF herunterladen (Seite 31)

HTML SET UP & DIAGNOSTIC

XSLAN SHDSL switch User’s guide ref 9014709-02 Page 31

A route is a table which registers which gateway address must be used to

transfer IP packets to a particular network.

For instance, referring to the drawing above, if IP packets have to be

transmitted from the IP network 1 to the IP network 2, a route has to be

created as follows :

Route name : “From NETWK 1 to NETWK 2”

Destination IP addr : “network 2 IP address”

Gateway IP addr : IP02

Remarks :

“Network 2 IP address” is the address of the network Nr 2; for instance

192.168.2.0.

IP02 is the address of the SHDSL interface of the XSLAN Nr 2.

To enable the routing function and assign an IP @ to the SHDSL

interface,

• select the “IP protocol & routing” menu and then the “IP protocol” menu,

• Select the “Routing mode active” checkbox.

• Enter the IP address, netmask, and, eventually, default gateway assigned to the

SHDSL network.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Keine Kommentare

ETIC 1230 Bedienungsanleitung Seite 31